Round Flat Slitter Knife/ Circular Slitting Blade for Corrugator
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Jiangxi
-
Validity to:
Long-term effective
-
Last update:
2020-10-26 14:45
-
Browse the number:
200
+
- Contactaixin:
anyue(Mr.)
- Email: telephone: phone:
-
Arrea:
Jiangxi
Address:1307, Block B, No. 1, High Tech Headquarters, No. 898, Zhuzhou Avenue, Tianyuan District, Zhuzhou City
- Website:
+
Product introduction
Quick Details
Place of origin:Hunan,China
Item:Circular blade for corrugated board/Circular blades for sliting corrugated board
Type:Industrial blades
Application:Cutting leather, cloth, film, fiber, tobacco, corrugated board, etc
Material:Tungsten carbide/HSS/SKD-11
Size:Different sizes,as your drawings
Application
Widely used for slitting corrugated boards in domestic and oversea machines orproduction lines.
Characteristic
This kind of knive is made by best pure tungsten carbide raw material,guaranteed high hardness and high wear resistance, the cutting edge is very sharp,flatness andhigh precision degree.
Product Specification
ITEMS |
COMMON SIZES OD*ID*T(mm) |
HOLES |
AVAILABLE FOR MACHIN |
1 |
φ230*φ110*1.1 |
6(HOLES)*φ9 |
FOSBER |
2 |
φ230*φ135*1.1 |
4 KEY SLOTS |
FOSBER |
3 |
φ220*φ115*1 |
3(HOLES)*φ9 |
AGNATI |
4 |
φ240*φ32*1.2 |
2(HOLES)*φ8.5 |
BHS |
5 |
φ240*φ115*1 |
3(HOLES)*φ9 |
AGNATI |
6 |
φ250*φ150φ0.8 |
- |
PETERS |
7 |
φ257*φ135*1.1 |
- |
FOSBER |
8 |
φ260*φ112*1.5 |
6(HOLES)*φ11 |
ORANDA |
9 |
φ260*φ140*1.5 |
- |
ISOWA |
10 |
φ260*φ168.3*1.2 |
8(HOLES)*10.5 |
MARQUIP |
11 |
φ270*φ168.3*1.5 |
8(HOLES)*10.5 |
HSEIH |
12 |
φ270*φ140*1.3 |
6(HOLES)*φ11 |
VATANMAKEINA |
13 |
φ270*φ170*1.3 |
8(HOLES)*10.5 |
- |
14 |
φ280*φ160*1 |
6(HOLES)*φ7.5 |
MITSUBISHI |
15 |
φ280*φ202*1.4 |
6(HOLES)*φ8 |
MITSUBISHI |
16 |
φ291*φ203*1.1 |
6(HOLES)*φ8.5 |
FOSBER |
17 |
φ300*φ112*1.2 |
6(HOLES)*φ11 |
TCY |
ITEMS |
COMMON SIZES OD*ID*T(mm) |
HOLES |
1 |
Φ200*φ122*1.2 |
- |
2 |
Φ210*φ110*1.5 |
- |
3 |
Φ210*φ122*1.3 |
- |
4 |
Φ230*φ110*1.3 |
- |
5 |
Φ230*φ130*1.5 |
- |
6 |
Φ250*φ105*1.5 |
6(HOLES)*φ11 |
7 |
Φ250*φ140*1.5 |
|
8 |
Φ260*φ112*1.5 |
6(HOLES)*φ11 |
9 |
Φ260*φ114*1.6 |
8(HOLES)*φ11 |
10 |
Φ260*φ140*1.5 |
- |
11 |
Φ260*φ158*1.5 |
- |
12 |
φ260*φ112*1.4 |
6(HOLES)*φ11 |
13 |
φ260*φ158*1.5 |
3(HOLES)*φ9.2 |
14 |
φ260*φ168.3*1.6 |
8(HOLES)*φ10.5 |
15 |
φ260*φ170*1.5 |
8(HOLES)*φ9 |
16 |
φ265*φ112*1.4 |
6(HOLES)*φ11 |
17 |
φ265*φ170*1.5 |
8(HOLES)*φ10.5 |
18 |
φ270*φ168*1.5 |
8(HOLES)*φ10.5 |
19 |
φ270*φ168.3*1.5 |
8(HOLES)*φ10.5 |
20 |
φ270*φ170*1.6 |
8(HOLES)*φ10.5 |
21 |
φ280*φ168*1.6 |
8(HOLES)*φ12 |
22 |
φ290*φ112*1.5 |
6(HOLES)*φ12 |
23 |
φ290*φ168*1.5/1.6 |
6(HOLES)*φ12 |
24 |
φ300*φ112*1.5 |
6(HOLES)*φ11 |
Remarks: we can make them as your demand.
Prodection details
Circular blades for corrugated board are widely used in the following fileds
• Plastic & rubber • Paper converting,packaging • Tobacoo |
• Foil ,film,tape • Printing • Nonwoven & textile |
Precautions and processing methods
1. When the circular blade for corrugated board is not used, the blade should be hung vertically on a dry shelf. The circular blade should not be placed flat. Flat laying will cause the circular blade to deform.
2. The serrated teeth of the round blade are super-hard and sharp, and it is forbidden to collide and fall off the ground.
3.Take protective measures during handling, such as protective gloves, work gloves, safety helmets, safety shoes, and safety glasses.
4. When installing the round blade, you must first check whether the round blade has cracks, distortion, flattening, tooth loss, etc., and then install it.
5. After the installation is completed, make sure that the center hole of the circular blade is firmly fixed on the flange. When there is a washer, the washer must be set; then, gently push it by hand to confirm whether the circular blade rotates eccentrically.
6. Do not exceed the specified maximum speed when using.
7. Pre-rotation before use: After replacing the new blade, it needs to be pre-rotated for one minute before use, and the cutting table can be cut when it enters the working state.
FAQ
Q1:Is it all right to make customer's own brand name?
A:Yes, we can provide customized services for customers, and we can make their own brand names.
Q2:When you can reply to me when I send you an Inquiry?
A.We promise to reply within 24 hours( including holidays) on receipt of your inquiry.
http://www.anyuecarbide.com/