PVDC, PE, PVC, Aluminum Film Laminator Machine
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Zhejiang
-
Validity to:
Long-term effective
-
Last update:
2017-11-02 12:38
-
Browse the number:
279
+
Jinhua City Shengchang Machinery Co., Ltd.
- Contactaixin:
Ms. Helena(Mr.)
- Email: telephone: phone:
-
Arrea:
Zhejiang
Address:Shanzao Village, Xietang Town, Jinhua, Zhejiang, China 321000
- Website:
+
PDVC,PE,PVC, aluminum film laminator machine
video link https://www.youtube.com/channel/UCLD7H0yF8M3ghzYF0uI_mcg
Applicable material :
This machine is suitable for the double-layer or multiple-layer lamination of such roll film material as BOPP, PET, Nylon, CPP, CPE, aluminum foil and paper, etc.
Features:
- -The whole machine use constant tension control and protection , with high running reliability and stability.
-- Method of coating is Textured coating ,coating scraper is double axis mechanical independent moving , adjustment method of scraper is pneumatic , angle can be adjust. The tension of coating depends on different anilox roller
-- 4 section side close style constant temperature oven, wind in and out in different layer ,Negative pressure design ,powerful blowing, thoroughly dry ,secondary return air,save engery and reduce residual solvents content
--High-precision backpressure 3 rollers composite device ,composite roll use Interlayer heat conduction oil circulation ,middle Electric heating tube,make laminating more even and solid
--Take-up and pay-off stand :manual , Hydraulic lift , double station electric rollover
Details
Technical Parameter:
Product sample
Unwinding part
Gluing part
1.the method of gluing is anilox roller immerse into glue plate directly,then by the scraper to scrape off the excess glue to carry on the quantitative sizing,the Dia. Of anilox roller is 150mm
2. Gluing anilox roller installation is air top fixed structure
3. The scraper device is a double shaft pneumatic pressure clutch
4. lateral movement ±5mm, the position of scraper can be adjusted by manual , horizontal movement by separate motor
5. The glue anilox roller is driven by a single motor (2.2Kw cycloidal pin gear speed reducer)
6. Glue bucket is stainless steel , upper and lower position can be adjusted manually
7.Double cylinder swing arm type pressure rollers ,the pressure is adjustable.roller diameter 120mm. (polyurethane)
8.Observation window device to supervise the effection ,there is exhaust duct above the window
Drying oven part
1.Oven 4 section , 8 meters , close-loop electric heating (length can be changed as customer's request)
2. Each section oven Temp. automatic constant temperature control,the temperature is displayed by the temperature control meter
3. The upper case oven is pneumatic opening and closing
4. Concentrated exhaust gas discharge pipe
5.The whole oven is negative pressure design
6. The oven has thermal insulation function, insulating layer thickness is 30mm
7. Each section air inlet and exhaust air volume can be adjusted
8. The guide roller in the oven is active roller and is synchronized with the main machine
9. The entrance of oven has floating roller to control gluing and tunnel is synchronized with the main machine
10. Electric heating power : each section 15KW
11. Air inlet motor 1.1Kw , 4 pcs
12.Exhaust air motor 2.2Kw, 1 pcs
13. The exit of oven has rectifying control to make sure material go in order
Laminating part
Rewinding part
Rack part
Lighting part
Each part has energy saving lamp
Main configuration list
After-sale Service & Warranty:
1. Customer's site installation, training & maintenance available
2. 12-24 hours Online service by Email, Fax, Video Online for basic setup and repairs
3. 12 months warranty for machine, life-long tech. support
4. Recommend equipment of top choice based on your requirements for product;
5. Examining mold drawings on your behalf to confirm optimum structure size meeting high frequency process;
6. Providing assistance in manufacturing and modifying tools;
7. Our engineering instruction will guarantee your productive manufacturing of top-quality products.
Packaging
Company :
JINHUA SHENGCHANG MACHINERY CO.,LTD
- Innovation
- High-tech
- Customized ,Non - standard Machine
- 24 Hours Service
Contact : Helena
Tel: 86-579-82977197 Fax: 86-579-82971202
Mob: +86 17757929826
www.xiangyangpack.com
video link https://www.youtube.com/channel/UCLD7H0yF8M3ghzYF0uI_mcg
Applicable material :
This machine is suitable for the double-layer or multiple-layer lamination of such roll film material as BOPP, PET, Nylon, CPP, CPE, aluminum foil and paper, etc.
Features:
- -The whole machine use constant tension control and protection , with high running reliability and stability.
-- Method of coating is Textured coating ,coating scraper is double axis mechanical independent moving , adjustment method of scraper is pneumatic , angle can be adjust. The tension of coating depends on different anilox roller
-- 4 section side close style constant temperature oven, wind in and out in different layer ,Negative pressure design ,powerful blowing, thoroughly dry ,secondary return air,save engery and reduce residual solvents content
--High-precision backpressure 3 rollers composite device ,composite roll use Interlayer heat conduction oil circulation ,middle Electric heating tube,make laminating more even and solid
--Take-up and pay-off stand :manual , Hydraulic lift , double station electric rollover
Details
Technical Parameter:
Model | SCM-FH600 | SCM-FH800 | SCM-FH1100 |
Width of laminating | 600mm | 800mm | 1100mm |
Oven length | 10m | 10m | 10m |
Laminating speed | 10-130m/min | 10-130m/min | 10-130m/min |
Diameter of unwinding material roll | 800mm | 800mm | 800mm |
Oven temperature | 110°C | 110°C | 110°C |
Heating method | electrical heating | electrical heating | electrical heating |
Total power | 60kw | 70kw | 80kw |
Weight | 8000kgs | 8900kgs | 10000kgs |
Overall dimensions (L×W×H) | 14000×1450×3200mm | 14000×1650×3300mm | 14000×1850×3200mm |
Product sample
Unwinding part
- Independent single station discharge rack ,automatic photocell rectifying control
- Horizontal manual adjustment of volume:±20mm
- The 1st unwinding tension 50N.M, magnetic particle brake control,tension PLC control
- The 2nd unwinding tension is 50N.M, magnetic particle brake control, tension PLC control
Gluing part
1.the method of gluing is anilox roller immerse into glue plate directly,then by the scraper to scrape off the excess glue to carry on the quantitative sizing,the Dia. Of anilox roller is 150mm
2. Gluing anilox roller installation is air top fixed structure
3. The scraper device is a double shaft pneumatic pressure clutch
4. lateral movement ±5mm, the position of scraper can be adjusted by manual , horizontal movement by separate motor
5. The glue anilox roller is driven by a single motor (2.2Kw cycloidal pin gear speed reducer)
6. Glue bucket is stainless steel , upper and lower position can be adjusted manually
7.Double cylinder swing arm type pressure rollers ,the pressure is adjustable.roller diameter 120mm. (polyurethane)
8.Observation window device to supervise the effection ,there is exhaust duct above the window
Drying oven part
1.Oven 4 section , 8 meters , close-loop electric heating (length can be changed as customer's request)
2. Each section oven Temp. automatic constant temperature control,the temperature is displayed by the temperature control meter
3. The upper case oven is pneumatic opening and closing
4. Concentrated exhaust gas discharge pipe
5.The whole oven is negative pressure design
6. The oven has thermal insulation function, insulating layer thickness is 30mm
7. Each section air inlet and exhaust air volume can be adjusted
8. The guide roller in the oven is active roller and is synchronized with the main machine
9. The entrance of oven has floating roller to control gluing and tunnel is synchronized with the main machine
10. Electric heating power : each section 15KW
11. Air inlet motor 1.1Kw , 4 pcs
12.Exhaust air motor 2.2Kw, 1 pcs
13. The exit of oven has rectifying control to make sure material go in order
Laminating part
- laminating roll is drive roll Dia 320mm , surface chromed and mirror polishing , main motor 4 Kw, synchronous control of composite roller line speed and coating anilox roller surface line speed
- The composite pressure roller On-off is controlled by the cylinder,pressing roller diameter 150mm
- The composite pressure roller adopts oil heating (9KW), hot Oil Flue In The Inner Surface Of Roll For heating lamination roll
- Constant temperature automatic control the surface temperature of composite roller
- The rubber of composite rubber roller is heat resistant rubber material , hardness (A)80-85° , Max. Temperature of compound roll surface 100 degrees Celsius, Max.pressure is1500kg
Rewinding part
- Single station receiving rack
- The receiving shaft is driven by torque motor (1 set)
- The Dia. Of roller is 76mm, air expansion axle 1 pcs
- Material volume horizontal manual adjustment: + 20mm
Rack part
- Integral high strength low stress alloy cast iron board
- The board size 1900X700X100(mm)
- u-steel : international standard
Lighting part
Each part has energy saving lamp
Main configuration list
Item | Model | Brand | unit | Qty |
Main motor | 4KW | Made in shanghai | set | 1 |
Motor inverter | 4KW | YASKAWA | set | 1 |
Gluing motor | 2.2Kw | Made in shanghai | set | 1 |
Gluing motor inverter | 2.2Kw | YASKAWA | set | 1 |
Magnetic powder brake | 50N.M | Shengda | set | 3 |
Winding torque motor | 40N.m | weili | set | 1 |
Automatic temperature controller | 96x96 | Made in china | pcs | 5 |
Air inlet centrifugal fan | 1.1KW | weili | pcs | 4 |
Suction centrifugal fan | 2.2KW | weili | pcs | 1 |
Bearing | pcs | several | ||
Guiding roller | Ø80 Ø100 | pcs | several |
After-sale Service & Warranty:
1. Customer's site installation, training & maintenance available
2. 12-24 hours Online service by Email, Fax, Video Online for basic setup and repairs
3. 12 months warranty for machine, life-long tech. support
4. Recommend equipment of top choice based on your requirements for product;
5. Examining mold drawings on your behalf to confirm optimum structure size meeting high frequency process;
6. Providing assistance in manufacturing and modifying tools;
7. Our engineering instruction will guarantee your productive manufacturing of top-quality products.
Packaging
Company :
JINHUA SHENGCHANG MACHINERY CO.,LTD
- Innovation
- High-tech
- Customized ,Non - standard Machine
- 24 Hours Service
Contact : Helena
Tel: 86-579-82977197 Fax: 86-579-82971202
Mob: +86 17757929826
www.xiangyangpack.com